The Woodwork Dust Control Company

Complete Wood Waste Extraction Service to All Timber Industries

01844 238833

Filters

We offer a comprehensive range of filters from mobile single filter extractors to substantial external bagging and hopper units servicing large woodworking facilities.

If you are unsure as to the type and size of unit that would be the most suitable for your needs please feel free to contact us and discuss your requirements. We will also be pleased to offer a free quotation, without obligation, for bespoke extraction systems to suit any application. We can work from a factory plan or we would be pleased to visit your site to survey it.

For a copy of our full catalogue please click here or on the Catalogue button above.

All of our extraction and filtration systems comply with COSHH (Control of Substances Hazardous to Health) Health and Safety regulations

Large Filters

H (Hopper) Range

Hopper rangeThese are almost identical to the Bagging range, but instead of discharging into bags they are supported by steelwork such that the waste can fall into a skip or transfer system. Because of their height, they are normally located externally.

JH (Jumbo Hopper) Range

Jumbo hopper rangeSimilar to the H (Hopper) range but of generally greater capacity. Ideally suited to larger woodworking applications where the volume of waste is likely to be substantial.

TF (Thruflow) Range

Thruflow rangeThese units provide no waste collection facility – instead they filter around 80% of the air thus concentrating the waste and transferring it to a collection point or a further system downstream. They have many applications and are particularly suited to increasing the capacity of an existing system.

CH (Chainfilter) Range

Chainfilter RangeThe significant feature of this range of unit is that waste is dragged to one end for discharge by a chain conveyor. This arrangement eliminates the need for a hopper and therefore there is virtually no limit to the size of plant. They are also ideal for sites where the height of an equivalent hopper plant would be unacceptable. Filter cleaning is normally provided by reverse air regeneration fans.

CY (Cyclofilter) Range

These sophisticated units employ the cyclone principal to pre-separate most of the heavy waste leaving the conventional filters to trap the remaining small volume of fine waste. This feature virtually eliminates the possibility of the blockages often associated with larger systems and a further attraction of the range is its small ground area requirement. Filter cleaning is generally by means of reverse air regeneration fans.

Small Filters

WV Range

These small drum type units operate at relatively low air volumes but a high static pressure. Such characteristics are ideally suited to small bandsaws or hand tools such as sanders and routers with a small bore extraction outlet (80mm or less).

Woodwork Range

Woodwork rangeThis is our most economical range suitable for larger waste particles and chippings although they may optionally be fitted with SMART filters to handle MDF and hardwoods. In common with other manufacturers, these units operate at a relatively high filter speed to produce a competitively priced product. One or more filters are fitted above the unit body with a polythene collection bag below. The suction fan is an integral part of the unit body. This range of unit is designed for internal use although they may be located externally if suitably weatherproofed.

MF Range

MultifilterThese units are suitable for MDF, chipboard, hardwood and sanding dust. Several cylindrical filter sleeves with a relatively large area are fitted above the unit body with one or more collection bags below. The filters are supported by a frame which is automatically agitated on shutdown to dislodge fine dust from the filter sleeves. The suction fan is an integral part of the unit body. Units are available for internal or external location

MF Super Range

Similar to the MF range, these units are more powerful and offer better suction

Bagging Range

Bagging RangeGenerally of larger capacity than the MF range, these units are suitable for MDF, chipboard, hardwood and sanding dust. Many cylindrical filter sleeves with a relatively large area are fitted above the unit body with two or more polythene collection bags below. The filters are supported by a frame which is automatically agitated on shutdown to dislodge fine dust from the filter sleeves. A suction fan may be separately specified dependent on the required duty. Units are available for internal or external location.